عنوان فارسی مقاله: | یک مبدل دیجیتال به آنالوگ جدید مبتنی بر ارجاع گاف انرژی با انحراف کم |
عنوان انگلیسی مقاله: |
A New Digital to Analog Converter Based on Low-Offset Bandgap Reference |
1- معرفی
2- طراحی کلی مدار DAC
3- طراحی مدار BGR
4- طراحی مدار راه انداز
5- طراحی مدار هسته DAC
6- نتایج اندازه گیری و تحلیل
7- نتیجه گیری
کلمات کلیدی :
The design of a low offset bandgap reference - ResearchGatehttps://www.researchgate.net/.../315428831_The_design_of_a_low_offset_bandgap_ref...Mar 21, 2017 - The design of a low offset bandgap reference. Conference ... A New Digital to Analog Converter Based on Low-Offset Bandgap Reference.[PDF]ANALOG-DIGITAL CONVERSION - Analog Deviceswww.analog.com/media/en/training-seminars/design...Conversion.../Chapter7.pdfThe development of low voltage (<5 V) references based on the bandgap voltage of ..... The accuracy of an ADC or DAC can be no better than that of its reference. .... With less than ±150-µV offset error and under 1-µV/°C drift, the buffer.[PDF]Chapter 3: Basic Applications Circuits for CMOS DACs Operated in the ...www.analog.com/media/en/training-seminars/design.../CMOS-DAC.../Chapter3.pdfthe op amp is stable when configured with the DAC,. Cfmay be ... results in errors due to the noise gain of the DAC,. ' (see 2.4.2). ... PET—input amplifiers, with low input offset voltage ..... synthesize a reference voltage based on the bandgap.[PDF]DAC8512 +5V, Serial Input Complete 12-Bit DAC - Analog Deviceswww.analog.com/media/en/technical-documentation/data-sheets/DAC8512.pdfDAC, a curvature-corrected bandgap reference, a rail-to-rail output op amp, a DAC ... input stage which provides low offset voltage and low noise, as well as the ...None Operational Amplifier (OPA) Based: Design of Analogous ...https://www.preprints.org/manuscript/201612.0143by HP Chan - 2016 - Related articlesDec 29, 2016 - Band-gap voltage reference; voltage reference; circuit design .... A New Digital to Analog Converter Based on Low-Offset Bandgap Reference.[PDF]Digital to Analog Converter - Silicon Labshttps://www.silabs.com/documents/public/application-notes/AN0022.pdfSep 16, 2013 - of the DAC's internal bandgap references or the VDD voltage can be selected as reference. .... If the channel 0 PRS line is low, a voltage ... Offset calibration is done separately for each channel through the CHxOFFSET .... based on the correct waveform table and the current frequency/amplitude/offset ...